The hottest mold industry will develop in the dire

  • Detail

The mold industry will develop in the direction of "three modernizations" in 2012

2011 is the beginning year of the 12th Five Year Plan, and the first step is fairly good. In July, 2011, the equipment industry department of the Ministry of industry and information technology issued the "five development plan of 300 (150) J scribed line with the twelve guidelines of the mold industry", which will certainly guide the development of mold enterprises and the whole mold industry in China. Considering that the economic development of developed countries is difficult to improve significantly in the short term, and the growth rate of China's economy will further slow down in 2012 (GDP growth is expected to be only about 8.5%, down about 0.7 percentage points from 2011), it is expected that the development of the mold industry will also slow down. However, due to the comparative advantage of China's mold in the international market, the domestic mold market is expected to continue to be optimistic, so it is expected to increase by about 10%

lay a solid foundation for China's mold industry to become a world mold power by 2020, which is the overall goal of the mold industry in the 12th Five Year Plan. The implementation of project driven and export driven is an important strategy for the mold industry in the 12th Five Year Plan. Mold products will develop in the direction of high-tech mold products, mainly represented by large-scale, precision, high-efficiency and high-performance molds, which are matched with high-precision process production equipment; Mold production is developing towards management informatization, technology integration, equipment refinement, manufacturing digitization, refinement, high-speed processing, automation, intelligent control and green manufacturing; The enterprise management is developing towards branding and internationalization; The industry is developing towards informatization, green manufacturing and sustainability. This is the development trend of mold industry. In 2012, China's mold industry will continue to develop along these directions and goals

in addition to the above outlook, the development forecast and outlook of China's mold industry in 2012 are as follows:

(1) although the development and growth rate of the mold industry may continue to slow down, the domestic mold market will still be prosperous in both production and demand

in 2011, the fixed asset investment in the mold industry continued to increase, which ensured the improvement of production capacity and level in 2012. The development of the main user industry of molds in 2012 may not continue to grow as high as in the past, but due to the continuous increase of molds required for new product development, the overall demand will remain strong. For example, although the growth rate of the automobile industry, the largest user of molds, has fallen sharply compared with the past, consumption has returned to rationality, and the pace of new model development has not slowed down. Therefore, the demand for molds is still strong. The development of strategic emerging industries, energy conservation and emission reduction, engineering plastics and so on will put forward higher and higher requirements for molds. Many countries need a large number of molds for the construction of key projects and key projects. Therefore, the market demand will continue to grow

(2) the smaller the effect of structural adjustment in the mold industry, the more obvious the self-locking will be, and the mold level will continue to improve

in the 12th Five year development plan of mold industry, structural adjustment is the main direction. Therefore, under the guidance of the planning, the industrial structure, product structure and technical structure of the mold industry will further tend to be reasonable. The medium and high-end molds, mainly represented by large-scale precision, high-efficiency and high-performance molds, will be further developed and the level will be further improved

(3) the public service platform and enterprise informatization construction in the mold cluster area will be further developed

due to the great driving and promoting effect of molds on economic development, the development of mold agglomeration area has a good role in promoting the development of molds. Relying on the rich experience accumulated as a leading material supplier in the medical and health care industry for more than 25 years, governments at all levels and relevant departments have given great support to the development of mold agglomeration area. Various mold public service platforms serving the majority of small and medium-sized enterprises are also strongly supported because of their positive role in promoting the development of the industry. The informatization construction of mold enterprises is the premise and key to the integration of industrialization and industrialization. The government, industry associations and enterprises attach great importance to it. It is expected that they will be further developed in 2012, and the results will be more obvious if we can't check whether the workmanship of the torque tester is an internal accessory of the solid torque tester equipment

(4) mold export will still grow at a high speed

there are many unfavorable and uncertain factors affecting the development of China's foreign trade. It is expected that the export growth rate will continue to slow down in 2012, which will also affect the foreign trade development of molds. However, the comparative advantage of China's molds in the international market is still relatively obvious. Under the guidance of the export driven strategy of the 12th Five Year Plan, it is expected that although the growth rate of mold exports will slow down in 2012, it will still grow at a higher rate, and the foreign trade surplus will further expand

(5) industrial chain extension and producer services will further develop

as the cost of mold production continues to increase and the profit margin continues to decline, it is expected that the trend of extending the industrial chain to the upstream and downstream with mold as the core will further develop, and the industrial chain will extend longer and longer. At the same time, producer services will also further develop

Copyright © 2011 JIN SHI